First off, if this email is coming to you several times, that is because of the multiple search strings that I use to get to you. I am refining my searches, so PLEASE be patient with me!

Secondly, if this opportunity is not for you…PLEASE forward it along to someone that you respect.

Thirdly, if your applied in the past, please ping me so that I can look at your CV more closely.

Thank You!!!!!

I Am working on Three different opportunities:

1)

·         Our office in Brazil has the following opportunity for Stress Engineers (Initially 3 people but could go up to 10 or more).

·         Location: Aernnova’s facilities in Brazil (San Jose Dos Campos area)

·         Duration: 1 year +

·         Skills: Stress Engineers with + 6 years of relevant experience in static analysis of aircraft structures both Metallic and Composites. Good knowledge of FEM (Nastran/Patran or similar) and classical hand calculations (Bruhn, Niu, Roark, ESDU, etc…)

·         Rate: Up to $70 per hour USD maximum depending on relevant experience. This is the total rate and includes any Per Diem.

·         Please disclose your citizenship and if your require sponsorship.

·         Please indicate if you have a passport

This could be a good opportunity for engineers that would like to go back to Brazil for any reason but I don´t think it will be very attractive for other engineers with no especial interest in Brazil.

2) Specific Job Description: The Senior Mechanical Engineer/Stress Analyst will participate in design, analysis and testing of Aerostructures and mechanisms.

Senior Mechanical Engineer/Stress Analyst Requirements:

• MS/BS in Mechanics, Civil or Aerospace Engineering with 3+ years of experience designing, analyzing and testing spacecraft structures and mechanisms.
• Strong knowledge of stress and dynamics analysis of structural systems, using strength of materials hand calculations, FEMAP and PATRAN finite element analysis software is required.
• Experience should include assessment of failure mechanisms such as rupture, yield, buckling, fatigue and fracture.
• Knowledge of aircraft manufacturing techniques and typical aerospace materials, including aluminum honeycomb panels and composites is a plus (will train the right non aerospace candidate).
• Experience with the design and analysis composite/metallic interfaces is desired.
• Experience with aircraft structural test planning and performance is desired.
• Design and drawing experience using CAD strongly desired, with CATIA V5 experience preferred.
• Aircraft component-level design and analysis experience is desired.
• Hand Calculation is a requirement and will receive top priority

Location: Ann Arbor MI

Duration: On Going, long term Contract to hire

Pay rate: NOT TO EXCEED $50.00/hr NO per diem is allocated, but it is negotiable based on the project team that we put you on.

Outstanding communication skills are desirable

3) Our team, located on site in Montreal, is looking to add 5 Engineers

The length of the assignment is based on your desire to stay and can be anywhere from 6 months to 2 years. But we need people ready to start in September 2011.

This is a contract opportunity that could grow to fulltime employment with Aernnova Engineering here in Ann Arbor 

Your name was given to me because you are:

·         A Structural or Stress Engineer

·         You have a BS in Mechanical,  Aerospace or Civil Engineering

·         You have Nastran experience

·         You have Patran / FEMAP Processing experience

·         You can perform traditional hand calculations

·         You might have fuselage experience but will definitely have primary structure experience

·         You have performed stress analysis on metallic parts

·         Pay Rate is roughly $70.00 USD and that will include a Per Diem

In all cases please send me the following information:

Citizenship?

Sponsorship needed?

Are you able to accept USD paychecks (Do you have a bank Account that accepts US funds in the US)

Would you be able to receive a security clearance if needed?

Thank you for your support!
 

Mark S. Sholtis

“SHOLTIS, MARK” <mark.sholtis@aernnova.com>

Vice President,Technical Services

Aernnova Engineering US, Inc.

3891 Ranchero Drive, Suite 100

Ann Arbor, MI 48108

(734) 926-0511 – Office

(734) 926-0501 – Fax

(248) 225-6979 – Cell

http://www.aernnova.com