-
이력서를 작성해서 Monster에 post 했는데 몇군데 회사에서 컨택은 들어 오는데 결정적으로 뭔가가 부족한거 같아요..
SangJoon Lee
2130, University Ave, #38 Allen House, Madison, WI, USA, Zip 53726 Tel: 608-658-1383
E-Mail: mcp94@daum.net– Experience electronic and control instrument with the embedded microprocessor.
– Professional with extensive background hardware and software including digital filter, analog filter
– National project management experience with proven ability to design and implements large-scale projects
– Effective liaison between technical and non-technical persons
– Adept at determining requirements, project scheduling, and technology planning
– Interested in electrical hardware engineer and software engineer.Jun, 2003 ∼ Feb, 2005
Graduated from Myoungi-University(Seoul, Korea), Master of Electronic Eng, Researching assistance working with Bio-electronics. Studied with such as analog and digital signal processing, embedded system and LINUX, RTOS(Real Time Operating System), Semiconductor’s manufacturing processing. Worked in researching assistance and implemented such as project “CAN communication in the ECU”. Taught about microprocessor to undergraduate students.Jun, 2001 ∼ Jun, 2004
Worked in FuMedTec Co, Ltd(medical device development company) managed R&D Team in the development of electrocardiogram equipment in wired, wireless, developed Defibrillator equipment, Health monitoring system and designed those devices’ microprocessor part.
Typical Project Involvement
“Development of Automatic External Defibrillator” studied with “Korea institute of industrial technology evaluation and planning”(Jan, 2001 ∼ Dec, 2001)
-There is need to vary defibrillator discharge in response to detected fibrillation waveform, I was responsible for a five person team. Including software, digital and analog engineers and programmed on the microprocessor part.
“Development of Automatic External Biphasic Defibrillator and Efficiency Estimation” studied with “Korea ministry of Health and Welfare” (Jun, 2002 ∼ Apr, 2003)
– We have estimated defibrillation efficiency of an automatic external biphasic defibrillator system. Previous to this study, in order to verify the clinical efficacy and safety of the system, we have tested the system under laboratory environment and which 5 animals.Jan, 2001 ∼ Jun, 2001
Graduated from Myoungi-University(Seoul, Korea) in Feb, 2001, Bachelor of Control and Instrument Eng. After that worked in Cadence Korea Co, Ltd, AE(Application Engineer)/ Engineer Team. Trained about semiconductor’s software such as Verilog, HDL, VHDL, and then consulted and taught about Cadence software to customers. At those period, I designed a 16-bit microprocessor and assembler using Verilog and VHDL program.Jun, 1997 ∼ Jun 1998
Worked in the KTec electronics Co, Ltd with microprocessor engineer. At this period, developed tire wheel balancing machine using the i80c196 microprocessor. Responsible for microprocessor control program part.Honors and Awards
Jun, 1996 Received the fourth prize at the micro-mouse robot competition (Seoul, Korea).
Apr, 2000 Received the bronze prize at SAMSUNG micro-processor design contest (Seoul, Korea)Technical Proficiencies
Excellent Digital Skill
– Experience with Intel 86, 88, 51, 186, 286, 96, 196, 296 and other series including embedded 386
– ATEML, Micro-Chips, NEC, ARM Series 7 and 9.
– Design of analog and digital filter systems.
– High efficiency switching power supplies experience.
– Design of RTOS(Real Time Operating System) and Monitor program.
Software
– ANSI C, C++, Microprocessor Assembler ( Excellent C/C++ and Assembly program skill)
– National Instrument(Excellent CVI, LabView program skill), Matlab
– Visual C++, Visual Basic
– Other PC Application(Exel, Word, Power-point, Visio)
– UNIX, LINUX
Others
– Working knowledge of Or-CAD capture, Layout plus and Pspice(worked in Cadence design system).
– Analog and Digital design background.
– Can communication program to PC from target board with serial and parallel I/O Port.
– Experience with PC based measurement system.Publications
A thesis for Master’s degree
– 2005, Development of a real time ECG data compression algorithm for digital Halter system
Journal of research institute of industrial technology (Myoung-Ji University)
– 2005, A Flyback Converter Output Compensation Method for Implantable Cardioverter Defibrillator
– 2005, Development of Vehicle Condition Monitoring System using CAN Communication
– 2004, Safety Consideration for Workers with an Implanted Electronic Medical Equipment in Various Working Environment
KSMBE (Korea Society of Medical Biological Engineering)
– 2003, A Fibrillation Detection Algorithm for Automatic External Defibrillator
– 2003, Development of Automatic External Biphasic Defibrillator and Efficiency Estimation
– 2002, Development of Bio-signal Measurement System Using Bluetooth Communication Method
– 2002, Development of Automatic External Defibrillator
IEEK (The Institute of electronics engineers of Korea)
– 2003, Development of Automatic External Defibrillator System(Ⅰ)
A Competition of Samsung Human-tech Thesis 2003
– 2003, A Fibrillation Detection Algorithm, by Morphological Analysis