-
Global Engineering Company 현대엔지니어링에서
각 분야의 경험을 갖춘 유능한 인재를 모십니다.◈ 경력사원 채용
1) 모집기간 : 06.20.2011~07.05.2011
2) 모집인원 : ○○ 명
3) 모집분야 :Process/Roating Machinery/Piping/QA/HSE Engineer
4) 전형 절차: 서류전형 및 면접전형
5) 근무지: 한국
6)자격조건 :Bilingual
7)제출방법: 이메일 – Kimberly0118@hdec.co.kr 문의:281-647-8287(Kimberly Yu)서류전형후 휴스턴에서 면접이 있을 예정이며 희망 급여는 이력서에 명시하여 주십시요.
Requirement and Qualificatioin for Engineer Discipline Required Condition Required Working experience Process BS / MS / PhD in Chemical, Possesses vast experience in Basic and FEED engineering of
Gas Processing such as gas/oil separation, sweetening, dehydration and HC dew point control.Over Twenty (20) years experience Process BS/ MS / PhD in Chemical, Possesses vast experience in Feasibility study, Basic and FEED Engineering for Refinery.
Preferable experience of Feasibility study by LP Model, and each licensor’s technology evaluation.Over Twenty (20) years experience Rotating
MachineryMS / PhD in Mechanical, Possesses vast experience in Design & detail engineering of Gas Compressor & Gas Turbine equipments including Steam Turbine.
Preferable experience of Analysis Work such as Rotor Dynamics and Dynamic Simulation, etc.Over Eighteen (18) years experience Rotating
MachineryBS/ MS / PhD in Environmental Engineeing, Possesses vast experience in Feasibility study, Environmental Effect Evaluation, including design & detail engineering of Waste Water Treatment/ Water treatment Plant.
Preferable experience of procurement assiatnce work such as preparation of RFQ, perform Technical Bid Evaluation and coordination of prospective vendor, etc. Conversant with wide ranging relevant international codes and standards.Over Ten (10) years experience Combustion Equipment BS/ MS / PhD in Combustion Engineeing, Possesses vast experience in Feasibility study, Basic
and FEED Engineering including design & detail engineering of Combustion equipment package.
– To have capability to select the optimized type or model and sizing from various equipment
type and process requirements.
– To have many experience on the trouble shooting of the combustion equipment.
– Conversant with wide ranging relevant international codes and standards.Over Fifteen (15) years experience Piping Experienced as Engineer (Designer) for Piping& Plant Design
– Plant Layout
– 3D Model Review w/ ClientOver Twenty (20) years experience QA
Management– Certificate Holder Certified from International QMS systems
– Well known experience of Qulaity Audit of EPC Plant
– Fluent english communication, wrriting & conversationOver Fifteen (15) years experience HSE
Management– Certificate Holder Certified from International EMS Systems
– Well known experience & High technology for EPC Plant
– Fluent English communication, writing & conversationOver Fifteen (15) years experience Commissioning
Management– COMMISSIONING Manager shall have at least 20 years experience and Operation of minimum 10 years experience.
– At least 1 experience as commissioning manager for commissioning of Oil, Gas and Petrochemical Plant.
– Has adequate knowledge on the basic principle of management functions, i.e. planning, organizing, delegating, controlling and its application to plant commissioning management.
– Can prepare business correspondences and technical reports or direct a technical staff to prepare in organized professional manner. Possess the managerial capabilities, technical & testing commissioning expertise and leadership to handle, motivate and train in full development of start-up and commissioning/engineers, supervisors and commissioning staff under his team.
– Application Knowledge of any software, especially WINPCS or Equivalant, for plant Commissioning is an added advantage.– Over Ten (10) years in Oil & Gas Plant Operation.
– Over Ten (10) years in Petrochemical Plant Operation.Risk Management BS/ MS in Engineering
– To have capability of Planning for Risk Management in Oil & Gas Plant and Petrochemical
Plant.
– To have many experience on Quantifying and Analyzing Activity Risks.
– Conversant with wide ranging relevant international codes and standards.– Over Ten (10) years in Oil & Gas Plant Operation.
– Over Ten (10) years in Petrochemical Plant Operation.Construction Planning & Schedule BS/ MS in Engineering
– To have capability of planning for Construction Scheduling in Oil & Gas Plant and
Petrochemical Plant.
– To have many experience on Project Resources Planning and Construction Project Execution.
– Conversant with wide ranging relevant international codes and standards.– Over Ten (10) years in Oil & Gas Plant Operation.
– Over Ten (10) years in Petrochemical Plant Operation.Civil and Structural BS/MS in Civil Engineering, possesses vast experiences in Plant Civil and Structural Engineering Works (Basic or detailed engineering works) of Petrochemical or Oil & Gas Industry as below
– Geotechnical & Foundation engineering
– Structural design for concrete and steel structure (Pipe racks and equipment support
structures) by using computer softwares such as STAAD, SAP 2000, SACS, etc.
– Foundation design for static and vibratory equipmentOver Ten (10) years experience Electrical BS / MS / PhD in Electrical, Possesses vast experience in preparation of single line diagrams, equipment sizing & specifications for generators & various electrical equipments, such as HV switchyard, GIS, MV/LV Switchgear and MCC, DC & UPS etc. Engineering work for procurement of electrical equipment including preparation of material requisitions, technical bid analysis, review of vendor drawings & documents. Electrical system studies including short circuit, load flow, transient stability, harmonic analysis using ETAP. Detailed engineering works including cable sizing, grounding calculation, cable tray layout, power, lighting layout drawings and connection diagrams etc. Over Ten(10) years experience
Control System MS / PhD in Control system Engineeing, experience in Process control narrative & description, Functional control loops, Control logics, SIL calculation & verification Over Fifteen (15) years experience Cost Evaluation & Negotiation MS / PhD in Mechanics, Possesses vast experience in preparation of RFQ, cost estimation and procurement of material / equipment, and expediting to prospective vendor in the field of various refinary, petro_chemical plant.
Preferable experience is preparation of RFQ, and cost estimation for rotating machinary such as GTG, compressor, etc.. In addition, MS / PhD in Architecture , Possesses vast experience in preparation of RFQ, cost estimation for construction, and expediting to prospective sub_contractor in the field of various refinary, petro_chemical plant.
Preferable experience is negotiable ability to sub_contractor for RFQ, and cost estimation in the field of construction such as temp ficilities and gene_con, etc..Over Ten (10) years experience Mech. System design for Ultra-Supercritical
and/or
Supercritical Coal Power Plant.Over 10 Years Mech. System design for Ultra-Supercritical
and/or
Supercritical Coal Power Plant
and Combined cycle power plant.Over 10 Years Mech. System design for Ultra-Supercritical
and/or
Supercritical Coal Power Plant
and Combined cycle power plant.Over 10 Years Mechanical Processes capacity of mechanical engineering and
desing for primary system including Nuclear Steam
Supply System (NSSS) in nuclear power plant.Over 5 years C & I Processes vast experience of engineering and design
for process control and instrumentation in nuclear
power plant.Over 5 years C&I Capacity of control & Instrument engineering and
desing for primary system and/or Coal Power Plant
and Combined cycle power plant.Over 10 Years Mech. Certification of QS
and
Flunt English, Above Bechelor DegreeOver 5 Years