미국 모 대학에서 석사과정중인 학생입니다. 박사과정에 곧장 진학하는
것에 회의가 들어서 여기서 잡을 잡으려고 혼신의 노력을 하고 있습니다. 오퍼만 받는다면 내년 6-7월부터 일을 시작할 수 있습니다. 가능하면 미국회사에서 일하고 싶습니다. 장소는 가리지 않고요 미국 내면 OK입니다. 아래의 레주메는 인터넷 상인지라 저의 신상 정보는 가능하면 뺏습니다. 그래서 학교 이름, 전 직장 이름, 지도 교수…References들이 다 생략되었습니다. 관심이 있으신 분이 스스로를 소개해 주시고 연락처를 남겨 주시면 레주메를 전부 보내 드리겠습니다. 전공은 Analog & Mixed Signal IC이고 SMPS에도 지식이 있습니다. manarang_usa@yahoo.com 으로 연락바랍니다. 감사합니다.

OBJECTIVE
A challenging co-op or full-time research & development position in Analog/Power IC design
EDUCATION
08/2003-Present MS. Candidate with 3.8/4.0 GPA until 2004 Spring
Expected graduation: Summer in 2005
Thesis title: “Broadband Dielectric Spectroscopy CMOS Capacitive Sensing Circuit for Molecular Sensing”
03/1995-02/2002 B.S, Electronic Engineering
Thesis title: “Experimental Implementation of Optical Communication System with a Laser Diode and PC control” with Honors and 3.73/4.0 GPA
EXPERIENCE
08/2003–Present
Graduate Research Assistant
·Active Droop Control DC-DC Converter IC with Sliding Mode control
·Broadband Dielectric Spectroscopy CMOS Capacitive Sensing Circuit
·High Temperature Extremely Low Cut-Off Frequency LPF Array
·Frequency Synthesizer for Bluetooth application with 2.4-2.5Ghz frequency range
·Low Voltage Sigma-Delta Modulator for GSM application
·OTA for High Performance and High Resolution Applications
·Low Distortion Class AB Operational Amplifier
·PCB board level design for chip testing
03/2002–06/2003
Cellular Phone Design Engineer
· Assisting electrical parts sourcing and parts selection
· Participating in the GSM cellular phone system level design
· Reducing the leakage current of Power Management Unit in Sleep Mode
· Improving the PCB layout for better EMI and ESD characteristics
· Renovating the battery charging circuit for better stability
· Optimizing the RF calibration parameter for mass production
· Renovating the noise cancellation circuit for better audio quality

01/1999-06/1999 Ulgi International Book Store, Seoul, Korea
Assistant Manager
· Managing the books in stock with the computerized management system
· Assisting the international book importing process and doing the required paperwork
· Serving about 75 customers in the book store a day
· Surveying for better customer satisfaction

RELEVANT GRADUATE – LEVEL COURSES
Gained the highly advanced Analog/Mixed Signal IC Design Technique and fundamental background on the semiconductor model and Switching Mode Power Supply
1. VLSI Circuit Design (Analog IC Design)
2. Fluctuation of Physical and Electronic System(Semiconductor Noise Analysis)
3. Advanced Analog Circuit Technique (Advanced OTA Compensation, Low Voltage Design, Wideband Circuit, Linearity and Distortion Issue, Fully Differential Technique, Bandgap Reference)
4. MOSFET Modeling (BSIM model)
5. Broadband Communication Circuits (VCO, CDR, PLL, Matching Network, Wideband Amplifier)
6. Solid State Devices
7. Low Noise Design (Noise issue in IC)
8. Switching Mode Power Supply (DC-DC Converter & Building Blocks)
9. Linear Control System(Planned)

RELATED PROJECTS
1. “Active Droop Control DC-DC Converter Controller IC with Sliding Mode Control” Final Project in ‘Switching Mode Power Supply’ course
2. “Frequency Synthesizer for Bluetooth using CMOS 0.35um process with 2.4-2.5 Ghz frequency range”, Final Project in ‘Network Theory : Broadband Communication Circuits’ course
3. “Broadband Dielectric Spectroscopy CMOS Readout Circuit for Molecular Sensing”, Research Project with Dr. Sonkusale at Texas A&M
4. “A CMOS Sensor Array IC for Van der Waals Enhanced MOSFET and Taguchi Type Sensors”, Research Project with Dr. Sonkusale at Texas A&M
5. “±0.5V Power Supply, 100mV Input Signal Amplitude and 200Khz BW 2nd Order Low-Pass Sigma-Delta Modulator with 60dB SNDR for GSM application”, Final Project in ‘Advanced Analog Circuit Technique’
6. “Optimal & Low Distortion Class AB Operational Amplifier Design, using Design Automation Tools with BSIM model in MATLAB”, Final Project in ‘MOSFET MODELING’ course
7. “Design Automation Tools for BSIM model in MATLAB”, Term project in ‘MOSFET MODELING’ course
8. “OTA for High Performance and High Resolution Application with 105dB and 21Mhz GBW”, Final Project in ‘VLSI Circuit Design’ course
9. “GSM/GPRS Cellular Phone GX-200C, 208C and 209C with 65K Color LCD and 40 Poly Melody IC for China Market”, Development Project
10. “GSM/GPRS Cellular Phone GA-180A with Black and White LCD and 16 Poly Melody IC for North America Market”, Development Project
11. “Operational Transconductance Amplifier” Design Project in Microelectronic Circuit Class, Designed by PSPICE (Undergraduate)
12. “8 by 8 Booth Multiplier” Design Project In Digital VLSI Design Class in Univ. of Maryland, Designed by Magic Layout Tool and Berkley SPICE (Undergraduate)

TECHNICAL SKILLS
· Analog/Power IC Design & PCB Board Level Design
· Lab Skills : Oscilloscope(Agilent, Tektronix), Wireless Communication Test Set(Agilent 8960 Series, Rohde & Schwarz CMU200), Good soldering skill(Chip size passive components soldering)
· High-level language: C/C++, JAVA
· Operating systems: Linux, Windows 98/NT/2000/XP
· Software packages: Matlab, MS Office, GNUPLOT
· Design Tools : Cadence, Mentor Tools, PSPICE, Protel, PowerPCB

ACTIVITIES AND HONORS
· Texas Instruments Fellowship for 2004 and 2005
Spring
· In-state tuition waiver scholarship between 2003 Fall and 2004 Spring
· Honor Student Graduate in the commencement
· Semester Honor Student Award in Univ. of Maryland in 2001
· Semester Honor Student scholarship in 1999,2000 and 2001